"
"
"
"
Description
Five helmets in one. This is SMK's Hybrid Evo. A helmet for all seasons and for all uses. Thanks to the removable chin guard, visor and peak, Hybrid Evo can in fact be used as an enduro helmet (with peak, visor and chin guard), full-face (without peak with chin guard and visor) offroad (with peak and chin guard, without visor) jet offroad (with peak and visor) and street jet (with visor only).
Its outer shell is printed in two sizes in EIRT, has an aerodynamic shape that offers little resistance to air, to the advantage of the silence of the helmet. The inner shell is printed in differentiated density eps, for the best absorption of the energy deriving from an impact.
To remove the chin guard, use the two side buttons located at the end of the chin guard itself on the upper part. Hybrid has obtained the double European approval ECE 22-05 (J / P) both as a full-face and as a jet. The ventilation system has been designed to allow the constant entry of fresh air through the two adjustable air intakes, one on the chin guard and another on the upper part of the shell. The hot air can then escape through the rear extractor. The visor mechanism is simple and functional, and does not require the use of tools to remove or attach the external visor. cIt also allows a first click that allows the visor to remain slightly open, optimizing the anti-fog effect from low speeds.
The visor has an anti-scratch system and is molded in polycarbonate. It is designed for the use of Pinlock ® Original and is Extra Wide Vision. The practical anti-scratch treated internal sunscreen can be easily operated using a lever positioned on the lower left part of the helmet.
The breathable and anti-allergic internal padding is completely removable and washable and guarantees maximum comfort even after many hours of use.
The retention system is equipped with a practical snap closure with micrometric adjustment.
It is also designed for the installation of Bluetooth intercom systems.
DATA SHEET:
- Thermoplastic shell: (Energy Impact Resistant Thermoplastic)
- Urban, enduro and touring style
- The helmet is produced with caps of different sizes depending on the proposed size and thus allows to offer a perfect proportion between the volume of the helmet and the size of the motorcyclist, while maintaining the degree of protection and safety.
- Inner shell: printed in differentiated density eps
- double approval P / J
- With clear quick release anti-scratch visor
- Predisposition for Pinlock ® Original.
- Extra Wide Vision (very wide field of view).
- Internal anti-scratch sun visor.
- Visor mechanism: easy to use, does not require the use of tools
- Chin guard can be opened using a single button inside the chin guard. Locking slider.
- Removable and washable breathable and antiallergic interior
- Removable lower face and nose guard.
- Ventilation: all vents are adjustable. An air intake on the chin guard, an air intake on the top of the shell, a rear extractor.
- Retention system: snap closure with micrometric adjustment
- Bluetooth: ready
Its outer shell is printed in two sizes in EIRT, has an aerodynamic shape that offers little resistance to air, to the advantage of the silence of the helmet. The inner shell is printed in differentiated density eps, for the best absorption of the energy deriving from an impact.
To remove the chin guard, use the two side buttons located at the end of the chin guard itself on the upper part. Hybrid has obtained the double European approval ECE 22-05 (J / P) both as a full-face and as a jet. The ventilation system has been designed to allow the constant entry of fresh air through the two adjustable air intakes, one on the chin guard and another on the upper part of the shell. The hot air can then escape through the rear extractor. The visor mechanism is simple and functional, and does not require the use of tools to remove or attach the external visor. cIt also allows a first click that allows the visor to remain slightly open, optimizing the anti-fog effect from low speeds.
The visor has an anti-scratch system and is molded in polycarbonate. It is designed for the use of Pinlock ® Original and is Extra Wide Vision. The practical anti-scratch treated internal sunscreen can be easily operated using a lever positioned on the lower left part of the helmet.
The breathable and anti-allergic internal padding is completely removable and washable and guarantees maximum comfort even after many hours of use.
The retention system is equipped with a practical snap closure with micrometric adjustment.
It is also designed for the installation of Bluetooth intercom systems.
DATA SHEET:
- Thermoplastic shell: (Energy Impact Resistant Thermoplastic)
- Urban, enduro and touring style
- The helmet is produced with caps of different sizes depending on the proposed size and thus allows to offer a perfect proportion between the volume of the helmet and the size of the motorcyclist, while maintaining the degree of protection and safety.
- Inner shell: printed in differentiated density eps
- double approval P / J
- With clear quick release anti-scratch visor
- Predisposition for Pinlock ® Original.
- Extra Wide Vision (very wide field of view).
- Internal anti-scratch sun visor.
- Visor mechanism: easy to use, does not require the use of tools
- Chin guard can be opened using a single button inside the chin guard. Locking slider.
- Removable and washable breathable and antiallergic interior
- Removable lower face and nose guard.
- Ventilation: all vents are adjustable. An air intake on the chin guard, an air intake on the top of the shell, a rear extractor.
- Retention system: snap closure with micrometric adjustment
- Bluetooth: ready
More Information
| Manufacturer | SMK |
|---|---|
| Style | Off Road, Touring, Urban |
| Visor | visor, sun visor |
| Helmet Shell | polycarbonate |
| Thong Closure | micrometric |
| Color | Blue, White |
